mpps-v21-5

How To Use MPPS V21 To Read An Write PSG16

March 16, 2018 sales 0

Have luck with PSG16 read and write by MPPS V21 cable.       read, write PSG16 connecting cables can Opel Zafira 2.2 cables line can green, white sheathed, must be stripped strand of cables next to battery green cable can-h white cable can-l blue wire to green wire orange cable t Continue Reading →

Ksuite_

How to add Ksuite help file to Kess and Ktag

March 6, 2018 sales 0

Hello, how i can add manual to kess and ktag, into cd i have ksuite help zip but i don’t know the way for add to program, thanks!   Reply:   Hello, I had the same problem as you, unable to open the Help, even though I have placed the zip that came in the folder in the folder c:/ksuite Continue Reading →

fgtech-galletto-read-e38-1

Galletto v54 tested: successful & not successful

February 26, 2018 sales 0

(02/26/2018) Tested by myself, Galletto v54 clone: Successful: 1. EDC16U34 (03G 906 021 PD) via obd2 r/w caddy 2010 1.9tdi 2. Z10XE Opel Corsa 1.0 (ME1.5.5) on the bench r/w 3. Z18XE Opel Zafira Simtec 90 71.1 r/w (24kb file!!!) on the bench 4. Fiat Stilo 1.6 16v 2001y ecu 5NF.T1 via OBD2, on the Continue Reading →

How to use BDM100 programmer for Delphi ECUs

February 6, 2018 sales 0

BDM100 programmer is verified to work no issues with Delphi ECUs including: Delphi ECUs Delphi DCM3.2 ECUs Delphi DCM3.x (MB Version)   In detail…   Delphi ECUs   In case of a Delphi ECU the powerdistribution cannot be provided by special pads of the BDM port.   Use sepa Continue Reading →

bdm100-msv70-connection-1

BDM100 Siemens MSV70 User Manual (Wiring)

February 2, 2018 sales 0

BDM100 programmer Siemens MSV70 manual:   On the Siemens MSV70 ECU the power distribution is provided by the pins of the main connector   Use separate wires to connect GND and +12Vcc to the pins of the main connector (The main connector of the Siemens MSV70 ECU (equal to the one of the Continue Reading →

kess-v2-v5.017-red-pcb

How to update Kess V2 4.036 to 5.017?

January 26, 2018 sales 0

How to: Update Kess v2 4.036 to Kess 5.017 only way would be to replace nxp or unlock nxp (if possible) and reflash with 5.017 firmware if you have it and new sd card with 5.017 image on it there is people in the selling section selling nxp and sdcard for this   If you are not rich in DIY an Continue Reading →

kess-v2-SSM-cable

PCR2.1 Full Flash with Ktag and SSM cable

January 11, 2018 sales 0

PCR2.1 full flash VERY IMPORTANT!! In recent update,Kess V2 now can write PCR2.1 with VR-file without needing patch first with KTag. And KTag now also has the ability to extract the password and then do full read and write thru bootmode. Such a read can then be used by Alientech in their database Continue Reading →

2018-kess-v2-5,017

2018 Kess V2 5.017 vs 2017 Kess V2 5.017

January 9, 2018 sales 0

2018 Kess V2 firmware 5.017:   A lot of improvement on PCB components, compared to Kess made in 2017:   1.the left upper corner and the lower right corner notch size is not the same 2.More thanbuzzer 3.WFs = Infineon, BCR112 NPN Digital Transistor 4.27E = ON Semiconductor NUP2105LT1G 5 Continue Reading →