How to code an BMW E38 740i cluster swap with NCS & VVDIprog R270 etc?
Offer advice on how to code cluster swap in an BMW E38 740i with NCS & extra programmer (VVDIprog, R270, BeeProg, TNM5000, X-prog and many […]
BMW scanner
(Fixed) BMW E90 errors Winkpf errors after update MRS
This post starts with the errors that I have in MRS (airbags and seatbelts) after I updated MRS module using WinKpf. Finally I got it […]
BMW Diagnostic & Programming on 2011 E9x/E82 – ISTA or INPA/DIS?
There are many BMW diagnostic tools in the market, like ICOM A2 with ISTA D/P, K+DCAN cable with INPA, and OPS with DIS or SSS. […]
2016.2 ISTA+ ICOM A2 ISTA-D 3.53 ISTA-P 3.57
2016.2 BMW ICOM A/ A2 Rheingold is released with STA-D 3.53.30 ISTA-P 3.57.4.003 without USB dongle supporting engineer programming and working well on the newest […]
Easy Way to Install BMW Standard Tools (15 Minutes)
Here’s the easiest way to install BMW Standard Tools, offered by a BMW owner with K+DCAN interface, and he have developed a proven method that […]
E-sys error- the EST has expired , how to solve?
I bought an BMW ENET interface from China, and always worked fine before. But this morning, when i used E-SYS 3.23.4 in SoftToken, and enter PIN: 2670, E-SYS error popped up: The EST “D: \ BMW323 \ Data \ Code AwayDKF01.est” has expired. Contacted with the vendor, he sent me the useful solution. I tried it and worked ok… Wanna post here for sharing. Try to find out Install password in the file “***.nfo” , like the screenshot the vendor sent me: E-Sys 3.18.nfo) The SoftToken “PIN” should bee the “Install pass”
Perfect hardware Version ICOM for BMW FAQ
ICOM is the best diagnose and programming tool for BMW new and old models. Multi language. Perfect version is more steady, fast software running speed, […]
How to solve ISTA cannot open for BMW ICOM ISTA P ISTA D?
Today one of our customer use the ICOM ISTA software for BMW for first time. After he start the software, he cannot enter ISTA . It give me message […]
BMW ICOM A2 Emulator, or INPA K+DCAN cable?
One BMW car for one ICOM? NO! Many fresh BMW owners are new to vehicle diagnosis and have incorrect opinions that ICOM is the most […]
BMW ICOM A2+B+C Diagnostic Tool technical support
Now this BMW ICOM A2 hardware is the new developed version. It supports hareware update from now on. Part 1: DO NOT copy or crack […]
ICOM WLAN with a Ralink rt5572 based WiFi dongle and no router!
(This is quoted form http://www.bimmerforums.com/, post here just for sharing) Disclaimer: Comes with no warranty, posted for informational purposes, should not be used by anyone. […]
(Solved) INPA Error IFH-0009: NO RESPONSE FROM CONTROL UNIT
INPA error IFH-0009 No Response usually means a break down (or lack of) communication between the vehicle itself, and the laptop. More often than not, IFH-0009 […]
BMW E46 SMG Coding with BMW ICOM WinKFP software
Here is an example of coding BMW E46 M3 (with SMG2 transmission) Euro SMG mode also called “CSL Coding” with BMW ICOM engineering and developing […]
BMW ICOM A2 B C ISTA D ISTA P IPS Fault code V999 solution
One of our customer use 2015.7 BMW ICOM software and get the following prompt: Error: Data is only stored locally. Thus the process for overlapping […]
BMW ICOM software hdd copy error OBDexpress.co.uk
Our BMW ICOM software is the expert version. It includes NCS EXPERT , KSD , INPA, ediabase tool 32 winkfp and so on. This is the […]
“Inspection” appears on 2002 BMW 540i, what to do?
This post starts with a problem that the green bars have all disappeared and the word “inspection” appearing in their place on 2002 BMW 540i, […]
2015.10V BMW ICOM ISTA-D ISTA-P HDD/SSD No Dongle Win 8
BMW ICOM Rheingold ISTA-D ISTA-P diagnostic & programming software is newly released to 2015.10V without USB dongle and can be worked on Win 8 operating […]
Update BWM E38 OBD II port to D-bus diagnostic port
Old BMW E38 and E46 have 20 PIN underhood connector rather than standard OBD II 16 Pin diagnostic socket. In contrast, the OBD II port […]
How to use BMW ICOM 2015.8 Software HDD part 1?
New 2015.8 icom Software HDD for BMW is released. Which ISTA-D version is 3.49, ISTA-P version is 3.55.4.000. BMW software support diagnose and programming functions for BMW all series. […]
How to update BMW Creator C310 OBD2 code scanner to V4.8
Creator C310 BMW multi-system tool has newly updated to V4.8 in obdexpress.co.uk. Here is the instruction on how to update Creator C310 code reader to […]
