Ford OBD2 Tool is a newly released lightweight and friendly OBD device in obdexpress.co.uk It can read and write into EEPROM file, it can read out immo code, and directly edit key position byte, then replace the original key to a new key, also it can read out and write into the synchronized bytes Continue Reading →
I was able to secure a new ECM to install in the Ford Everest and I began the programming as shown in your video but after the procedure was completed the vehicle refused to start and listed a PATs code. I can not access the PATs reprogramming feature using the tool as there is no available menu Continue Reading →
I bought a few days before the diagnosis ford vcm software clone with 75 .. I have a problem in the communication I have installed the software, connected to the vehicle comes with a screen error (cable between ids and vcm not detected) what can be?? have change the IP address to 172.16.0.1 in C Continue Reading →
—Complaints: Sounds there are so many knock-offs like TOYOTA MINI VCI, MVCI, BMW K+DCAN interface…but no good “One Stop Electronics” cable for Ford cars? —Reply at OBDexpress: We OBDexpress have a new FORD OBD cable for odometer/mileage correction and key programming also, of Continue Reading →
Ford OBD2 Tool is a newly released lightweight and friendly OBD device. It is used to mainly perform Ford instrument calibration and immobilizer key matching. Ford OBD Tool language available: English and Chinese. Ford OBD Tool Feature: Instrument calibration work is friendly without removing ins Continue Reading →
Ford VCM 2 IDS V98.01 has been released officially at obd2express. And IDS 98.01 installation is offered here. IDS 98 only for Ford VCM II with wireless card: http://www.obdexpress.co.uk/wholesale/best-ford-vcm-ii-diagnostic-tool-wifi-wireless-version.html (best WIFI vcm ii) http://www.obdexpress Continue Reading →
Hi, all IDS users. Ford VCM/ VCM2 software nowadays, you know, has been tested by some vcm users that IDS can be worked fine on almost laptops with different operation system, and even iPhone mobiles. IDS V94 works well on Win 10: My IDS is still working fine on windows 10, IDS was installed o Continue Reading →
Here is the instruction on Ford Focus 2.8L 2008 PCM reprogramming using Ford VCM II IDS diagnostic system clone. Main procedure: Step 1: Install a new PCM Step 2: Reprogram PCM Step 1: Install a new PCM Install VMware and well setup IDS software follow the video/pdf guide (see attachment below) Continue Reading →
VCX NANO for Ford V96 and Mazda V95 2 in 1 is new released by VXDIAG company. Software support CD update. You can use it to diagnose Ford and Mazda vehicles from 1996 to latest 2015. Recent days, one of our customer open the VXDIAG NANO IDS Ford V96 software he installed, and get license not val Continue Reading →
The release of €99 VXDIAG VCX NANO Ford Mazda IDS V95 diagnostic scanner tool adds another cheap option for Ford and Mazda diagnosis. In another words, VXDIAG VCX NANO for Ford Mazda is targeting to the VCM 2 potential customers with a lower price. VXDIAG VCX NANO for Ford Mazda details: Where t Continue Reading →
