Ktag 7.020 “Hardware configuration not supported” Solution
Some users feedback KTAG 7.020 pops up an error “Hardware configuration not supported“, for example when they read any of bosch ME9.2 ECU, EDC16U34, EDC16U1, […]
KTAG ECU Programming
K-tag checksum Error problem and solution
This is the problem photo shown: From this photo, we can see the hardware serial number and software serial number. It means that the software […]
KTAG ECU Programming tool Using Tips
This post will answer all of following questions on Ktag master ECU programming tool including optional version, compatible vehicles, workable software, the difference among all […]
V2.13 KTAG K-TAG V6.070 firmware ECU Programming Tool does not Work
Everything installed right. In the menu nothing is available/black. “Info”-Button: there are no numbers, etc. Please look at the attached picture . Sorry to tell […]
KTAG K-TAG firmware V5.001, V6.070 and V7.003
There are several software and firmware versions of KTAG KSuite ECU Tuning Master kit available in obdexpress.co.uk. KTAG ECU programming tool different software & firmware […]
KTAG K-TAG KTM100 V2.13 firmware V7.003 Free Download
KTAG K-TAG KTM100 V2.13 firmware 7.003V ECU Programming Tool Master Version software can be free downloaded here: NOTE: Disable any anti-virus software and network connection […]
How to install K-TAG KTM100 V2.13 Firmware V7.003 software
Obd2experss.co.uk has newly launched KTAG KTM100 V2.13 firmware V7.003 ECU tuning mater kit. The KTM100 is the replacement of KSuite which brings brand-new interface and […]
