The tool: Digiprog 3 with version 4.94 software
The issue: receive error “UNKOWN DASHBOARD” connecting with obdII
The car: Ford Escape 2008
maybe is hcs12 and you must pute out dashbord and solder in with st48
Requires plug 48
FORD ESCAPE HCS12
Remove the instrument cluster and disassemble it. Find on the back
The 6-pin BDM port. Solder the cables from connector 48 (white, brown,
green, yellow) as indicated in the pictures in color. s. next page
Now choose the program:
Cars / Trucks – FORD – ESCAPE HCS12.
The DIGIPROG indicates the old / wrong KM level.
Program the new / correct KM booth and you’re done.
This is which color connects where on the dash
13 pin brown in db25 is gnd, 5 pin white is +, 18 is yellow and 17 is gren – if you find gnd in this six points you will know where the other colours should be