LAUNCH X431 X-PROG 3 is an advanced key programmer that can read & write immo chip for ECU repairing or cloning. Need to work with Launch-X431 series tablets like X431 PAD 7, X431 V+, etc. Below is the ECU clone supported list for reference.
X-PROG 3 Engine/Gearbox Supported List
| ECU Part Name | ECU Type | ECU Brand |
| EDC16XX | ECM | Bosch |
| EDC17XX | ECM | Bosch |
| MD1CSXXX | ECM | Bosch |
| MD1CPXXX | ECM | Bosch |
| ME17.X.X | ECM | Bosch |
| MED17.X.X | ECM | Bosch |
| MED9.X.X | ECM | Bosch |
| MEV17.X.X | ECM | Bosch |
| MEVD17.X.X | ECM | Bosch |
| MG1CSXXX | ECM | Bosch |
| MG1CPXXX | ECM | Bosch |
| MSDXX | ECM | CONTINENTAL/SIEMENS |
| MSVXX | ECM | CONTINENTAL/SIEMENS |
| SDIX | ECM | Continental |
| SIM271XX | ECM | Continental |
| SIMOS8.X | ECM | Continental |
| SIDXX | ECM | Continental |
| GM EXX/TXX | ECM | DELCO |
| 6HPXX | TCM | ZF |
| 8HPXX | TCM | ZF |
| 7DCT300 | TCM | ZF |
| 9G Tronic | TCM | Bosch |
| ALXXX | TCM | ZF |
| DPS6/DC4 | TCM | GETRAG |
| DKG | TCM | GETRAG |
| DLXXX | TCM | Temic |
| DQXXX | TCM | Temic |
| MPS6 | TCM | GETRAG |
| VGSX | TCM | GETRAG |
| VL381 | TCM | Temic |
| GM 6TXX/6LXX | TCM | DELCO |
Mercedes-Benz ECU Supported List
X431 X-PROG 3 supports to replace, read & erase Mercedes engine module. Types including CR3.xx, CR4.xx, CR5.xx, CR6.xx, CR60.xx, CRD.11, CRD2.xx, CRD3.xx, ME2.8.1, ME9.7, CRD2.xx, CRD3.xx, ME2.8.1, ME9.7, MED17.7.x, SIM4LE, SIM4LKE, SIM266, SIM271DE2.0, SIM271KE2.0.
X431 X-PROG 3 supports to replace, read & erase Mercedes gearbox module, covering VGS-NAG2, VGS2-NAG2, VG3-NAG2.
X431 X-PROG 3 supports to replace, read & erase Mercedes suspension module, covering KSM, DSM, ESM.
Similarly, X-PROG 3 can also clone BMW, VW, Audi, Porsche, Chrysler ECU to solve immo programming or coding issues.
