OBDSTAR P50 battery reset upgrade V30.06 has been released to support Audi BMS 8R0915233, 8R0915591 crash record erase and repair by bench. No need to disassemble or read the chip, no risk and difficulty, which can save a lot of maintenance costs. This is a tutorial on how to perform the new function step by step.
In Audi A6, A8 and Q5 hybrids, the hybrid battery management unit(BMS) disconnects and logs a P1609 fault code when a crash occurs: (!!! Crash shut-down activated!!!), resulting in the vehicle not starting.
At present, only a few auto electronic repair professionals through the brush firmware or open the cover through the programmer to repair. This way is high fees, risky and only support some models. Thus, OBDSTAR releases free upgrade P50 battery module repair function again!
OBDSTAR P50 Audi BMS Support List
| Brand | System | Part No. | Memory | Method | Function |
| AUDI | BMS | 5C6915182A | D76F0192 | BENCH | Check ECU info, read & erase DTC, read EEPROM |
| AUDI | BMS | 5C6915182B | D76F0192 | BENCH | Check ECU info, read & erase DTC, read EEPROM |
| AUDI | BMS | 8R0915233 | D76F0192 | BENCH | Check ECU info, read & erase DTC, read EEPROM, erase crash |
| AUDI | BMS | 8R0915591 | D76F0192 | BENCH | Check ECU info, read & erase DTC, read EEPROM, erase crash |
Accessories Required
OBDSTAR P50
P004 adapter
P004 jumper
Main cable
Audi BMS module
Please ensure OBDSTAR Airbag Reset Tool is charged and communicated during the process.
Operation
Airbag reset >> Battery reset >> Latest version >> AUDI >> BMS 8R0915233 D76F0192[BENCH] (Part number is on the ECU label)
Here we can check ECU info, read & erase DTC, erase crash and read EEPROM in advanced function.
Follow wiring diagram in “Pinout” to connect P004 adapter, main cable and ECU via jumper.
Turn on P004 adapter power button.
Click “ECU information” to check if the model number is consistent with the module ECU.
Click “Read DTC” to check fault code, there is a crash fault code.
Advanced function>> Read EEPROM(D76F0192) >> Enter >> Start >> Save data file
Please disconnect the 12V power supply and wait for 30s, then reconnect the 12V power supply.
Erase crash >> Enter >> Erase crash success
Crash history has been eased successfully.
Click “Erase DTC”.
Erase DTC success.
Go back to “Read DTC” again.
There’s no crash fault code.
