How-to’s of X431 V code E60 BMW 535xi (N54) INJECTORS?

Look here: how to use Launch X431 V to recode or change the injector flow rate for BMW’s, this was done a 2008 E60 535xi with the N54 direct injection twin turbo engine.

 

Select “BMW” – then “OK” to confirm the BMW newest Version (V50.00) is not the newest version, here is just an example.

Automatically search.

 

Information

1.If equipped with two socket, 20-pin and 16-pin, please use [BMW-20] connector.

 

Read out the BMW information.

 

Help Information:

To ensure the accuracy of the test results, Do the following:

1. Turn off the Ignition Switch.
2. Wait 10 seconds.
3. Turn on the ignition switch.

 

Select “System Scan“.

Select “Drive” , then “ECM (Engine Control Module -DME/DDE)“.

 

ECU Identify.

 

Special Function.

 

Select “Adjust Injectors.”

 

Selection:

1. Description of Injector Rate Adjustment.

2. Perform Injector Quantity Compensation.

 

End the session.

Launch X431 V to recode or change the injector flow rate for E60 BMW 535xi (N54)，works  done!

Enjoy.

 

www.obdexpress.co.uk