LAUNCH X431 4th 7-Speed Mercedes Gearbox Wiped Clean
The LAUNCH has pushed major updates in version V10.40 of the ECU clone software. Working with LAUNCH X431 ECU & TCU Programmer X431 X-Prog3 with […]
ECU programmer tool
VW MED17.5 TC1766 ECU Read Write Checksum Correction by KT200
It has been tested and confirmed by obdexpress.co.uk engineer that KT200/KTM200/ECUTuner read, write EEPROM and correct checksum for VW MED17.5 TC1766 like a charm! […]
(solved) Xprog-m v5.5.5 “verify error” fixed by Xprog v5.51
Here are important tips for all xprog users when they got this problem “verify error” during reading motorola mcu, and after try several time is […]
How to solve Kess V2 Bootloader adapter problems
Find a solution to fix Kess v2 clone bootloader adapter problems. Just put it here for sharing. Device: Kess v2 with ksuite 4.036 (China clone) […]
New Genius/K-touch With FGTech Galletto 2 for €359
Now buy New Genius ECU Hand-Held Chip Tuning Tool, you will get FGTech Galletto 2(SE61) for free,Until FGTech Galletto 2 is no stock in www.obdexpress.co.uk. […]
How to install XPROG Box 5.51 USB Key
Tips of the instruction on how to install XPROG box ECU programmer 5.51 USB key. Language :English only O/S requirement: Windows XP better Step-by-step instruction: […]
How to use PCF79xx-ADAPTER-V12 for VVDI PROG 4.1.2
Tips of using PCF79xx-ADAPTER-V12 for VVDI PROG PROGRAMMER V4.1.2 are offered at obd2express. (update: this instruction on use of PCF79xx adapters can be use for all […]
(Solved) Mercedes W203 EDC16C2 ECU problem not crank and not read on BDM
This post begins with Mercedes W203 EDC16C2 ECU problem that MPC556LF8MZP40 wont crank and ecu not possible to read on BDM, and finally solve the […]
Fgtech Galletto read BMW M3 Siemens MSS54 via BDM
Here is the instruction to read this ECU from BMW M3 Siemens MSS54 with FgTech Galletto V54 ECU Programmer by BDM. I need to read […]
Pinout 100 % ok: UPA USB programmer conection for Laguna 912
Pinout 100 % ok. UPA USB device programmer read and write HC912DG128A
Read sirius 32 on 2000 clio 1.4 with Fgtech galletto and TL866
Car model: 2000 clio 1.4 Issue: immo issues What I tried to do: read a sirius 32 Tool I tried to use: I tried with […]
Free MPPS V13.02 software driver and installation on Win 7
MPPS V13.02 EDC16 ECU Tuning Remap Chip tuning CAN Flasher is default to be installed on Windows XP operating system, but some have achieved it on […]
Xhorse VVDI2 and VVDI Pro add BMW CAS4+ key
This is an instruction on how to program BMW CAS4+key, read ECU data and generate key using VVDI2 key programmer and VVDI Pro programmer. Main […]
FAQ CarProg full v7.28 airbag reset tool
Frequently asked question gathered of CarProg v7.28 full version airbag reset tool. Q: My Carprog full V7.28 kept displaying “Enter password” error message, how to […]
Flash Renault Bosch EDC16 ECU with FGTech Galletto 4 Master via BDM
Following is an instruction on flashing Renault Bosch EDC16 ECU with V54 FgTech Galletto 4 Master ECU remapping tool via BDM. Same procedure applied to […]
