MINI DSG Reader DQ200+DQ250 Installation guide

MINI DSG reader is used to read and write latest dual-clutch DSG gearbox data for AUDI and VW.Here is the detail software installation instruction.

Note: Software needs activation before use. When you open the software, you will find a ID, send this ID and your order number to sales@obdexpress.co.uk. We will resend the license. Then you can go on to install the software and use it.

How to activate the software of MINI DSG reader?
http://blog.obdexpress.co.uk/2016/02/19/2014-06-mini-dsg-reader-dq200dq250-for-vwaudi/

Attention: Do not use internet when you install or use the software. Software cannot be updated online.

How to install MINI DSG Reader (DQ200+DQ250) software?
Step 1: Copy the software in the CD, paste them to your local
disk.
Step 2: Disable all Network Connection, including: the local
area connection, wireless network connection and 1394
Connection.
install MINI DSG Reader-1
Step 3: Open the MINI DSG Reader folder, click “run me first
registration entries”, and a windows dialogue popup reading:
Registry Editor„, click OK.
install MINI DSG Reader-2
Step 4: Click icon “DSG Reader” and a windows dialogue popup
displaying License expired, click OK, then another one popup showing
machine ID, press “ctrl+v” to paste, and click OK.
install MINI DSG Reader-3
install MINI DSG Reader-4
Step 5:
Create one txt file in the desktop and into it paste the machine ID, then
send it to your seller for activation.
install MINI DSG Reader-5
Step 6: your seller send back the license file activated, cut it and paste it
in to the Mini DSG reader folder.
install MINI DSG Reader-6
Step 7: right click the green icon “DSG Reader” to open it, then close the
appeared screen, and again right click “DSG Reader”-send
to-Desktop(create shortcut)
install MINI DSG Reader-7
Step 8: connect the DSG reader to the computer and the car, then it will
popup windows “ found new hardware”, step-to-step to install it.
install MINI DSG Reader-8
Step 9: click “my computer-device manager”, if you find “USB OBD II
cable”, it means the computer and the DSG reader establish
Communication.
install MINI DSG Reader-9
Step 10: Open the “Shotcut to DSGreader” in the desktop.
install MINI DSG Reader-10
install MINI DSG Reader-11
install MINI DSG Reader-12
Now, you are ready to start to use DSG reader to read and write latest dual-clutch DSG gearbox data for AUDI and VW.

Share