OBDSTAR X300 DP do all key lost for 2013 toyota RAV4 with G via OBDII

Newest OBDSTAR X300 DP tablet key programmer (diagnostic tool) comes with standard version and full version. Here i will teach you how to do all key lost for 2013 toyota RAV4 with G via OBDII.


Device: OBDSTAR X300 DP  key programmer full version


Master key and sub (G) key


G chip key



Connect X300DP with your vehicel through OBDII Port

Click “Diag Program” on the main menu

Choose “Type 2(with G72)”


Choose “Remote immobilizer(All key lost)” option


Then switch ignitino off and click OK


Switch ignition on and click OK


X300 DP will prompt you to switch ignition off and remove the key, just doing that and click OK


It is configuring the system, wait…


Then insert the removed key and switch ignition on


It is configuring the system, wait…

Switch ignition off and remove the key again

Then you can program keys as the following steps within 120 seconds


Here we program 1 master key and 1sub key.

Click OK to begin program keys

Step1: Insert the first master key, turn on the ignitino and wait for 5 seconds…

Step2: insert the second sub key (the G chip key),turn on the ignition switch and wait for 5 seconds

Step3: turn on the ignition switch quickly for 5 times, the security light will turn off, the programming is finished.

Done! Program key for 2013 toyota RAV4 with G successfully!



FacebookTwitterGoogle+LinkedInStumbleUponIf you like this,please share it with your friends