Confirmed! Remotes to Bmw 523i E39 2003 can be programmed by vvdi prog and vvdi2, cut by Condor XC-mini and generated by vvdi keytool.
Main steps:
Step 1: VVDI-Prog reads chip data
Step 2: VVDI2 programs a new remote
Step 3: Condor Mini cuts a new key
Step 4: Test the new key
Step 5: VVDI Keytool generates a remote
In detail…
Step 1: VVDI-Prog reads chip data
EWS3 box read ic: 0D69J use EWS3 adapter and VVDI Prog
Connect EWS3 adapter and soldering cable same as the diagram
Type: immobilizer; brand: bmw, chip: ews3-kline(od69j)
Connect 12v dc to VVDI-Prog
Read and save dump file
Step 2: VVDI2 programs a new remote
Vvdi2 Transponder programmer
Immobilizer data tool
Euro BMW EWS3 use chip 7935 blank for program
Load eeprom/dump file, choose not use key position
Put chip 7935 and make a dealer key
Prepare a dealer key successfully. Now the key can start the engine
Step 3: Condor Mini cuts a new key
Step 4: Test the new key
Test the new dealer key to check if it works good as the original or not
Before test, you should install the EWS3 box and try to start
Turn on for a second to synchronize the new key
The car start successfully
Step 5: VVDI Keytool generates a remote
Remote can be generated by VVDI Key Tool and programmed manually
Manually program the key
Done!
