KESS V2 5.017 software update to K-suite 2.47,it is tested extra 7400 vehicles working perfectly. You can free download K-Suite 2.47 here: https://mega.nz/#!8QgwSboa!XLUqAJBt6ISsL4ijpdxZ68emHJa8EMAvwLAq_ZRlZPg Password: Send personal message to email sales@OBDexpress.co.uk – No need to Continue Reading →
Here is a fix for the problem with 4.5mb simos 18 files. Device: ksuite 2.47 and kess v2 5.017 clone Error: “Wrong file size”. “File incompatible with the ECU” Tried 4mb file: not worked! Still the same Problem. Fix: Try in recovery and continue to the end of the process. Incorrect Continue Reading →
In both Clone Red KESS V2 Ver.2.25 & Ver.2.23 it is impossible to write with “UM 00: 0000” error. Customer solution 1: I have same problem when writing file to L33 Phoenix as 00:UMM:000 comes up. ID and reading goes fine, it’s just when using writing mode error comes up. Ha Continue Reading →
Free download KESS V2 KSuite 2.33 with protocol 576 for Abarth 124 r/w: https://mega.nz/#!kspDBQBD!64ybgw57IriCYTQ_5WtUcqlsGMb2oKitY24IQD5F37U Tested working with Kess v2 china clone: Kess V2 Firmware V4.036 Kess V2 Firmware V3.099 Kess V2 Firmware V4.024 Truck Version Kess V2 Firmware V4.0363 Tr Continue Reading →
This just some pictures talking about what’s new in Ksuite 2.47 for Kess V2 5.017 7400 new vehicles!!! THE MOST IMPORTANT NOTE: Ksuite 2.47 is being tested for more ECUs. – Unknown workability on new engines Ksuite 2.23 should be your best option so far (07-05-2018) NE Continue Reading →
Have anybody test SSM cable cable with the ktag clone for PCR2.1? Yep. Work good with KTAG original and HQ clone. SSM tested more times, works perfectly. Read and write in BSL on table without unlock after read password with SSM cable. PCR2.1 full flash VERY IMPORTANT!!! Pinout cabl Continue Reading →
Anyone know how to Update Kess v2 4.036 to 5.017? i found some tips here http://blog.obdexpress.co.uk/2018/01/26/how-to-update-kess-v2-4-036-to-5-017/ only way would be to replace nxp or unlock nxp (if possible) and reflash with 5.017 firmware if you have it and new sdcard with 5.017 image on it Continue Reading →
Bought a Kess V2 5.017 china clone, but no luck. I can try to read but writing is sometimes danger. power supply for akku. When I write flash, the ecu need a lot of power. Searched a lot… thought i should rework the inner board. Then i did something… Continue Reading →
How to: Update Kess v2 4.036 to Kess 5.017 only way would be to replace nxp or unlock nxp (if possible) and reflash with 5.017 firmware if you have it and new sd card with 5.017 image on it there is people in the selling section selling nxp and sdcard for this If you are not rich in DIY an Continue Reading →
Compared to KESS V4.036, the KESS V2 5.017 new firmware wins in protocol compatibility. KESS 5.017 supports more cars & bikes & trucks,with protocols fully activated, 140 more than v4.036. Look here: KESS V2 FW 5.017 adds 140 new protocols. Look here: Continue Reading →
Copyright © 2018 | WordPress Theme by MH Themes
