When the user tries to solve KTAG 7.020 master checksum error by following the working solution, one step is to download Alientech Ksuite 1.85 online, but the official site is not available with this version of ksuite, where to download? Here obdexpress.co.uk engineer upload one for you: https:/ Continue Reading →
Possible to OBD unlock Simos PCR 2.1 with Kess V2 clone? Look here: all information can be found here to help you unlock PCR 2.1 using Kess v2 china clone. Connection: ECU connection for the bootmode unlocking procedure only! Connect the ECU to the bootloader adapter Power u Continue Reading →
This is my experience pack software using BDM frame connectors china clone with Ktag 2.23 I have already received the shipment and I have time to test them without problems in Bosch EDC16U1 and in bosch EDC17c46. before using them I have reviewed almost all of these and I have not had Continue Reading →
This is how to open Bosch MED17 ECU: Here: gpt med17 ECU model from Audi a1 1,4tfsi 2016. The problem is that the board is clamped in the housing. After assembly, the unit is pressurized from both sides. If you look at the sides, you can see the place in which it is clamped in thes Continue Reading →
FYI, I’m here to to inform you guys that there are problems in the 16MB image version and which SD card image you should have for Ktag firmware 7.020. In detail… 4GB SD image OK “KTAG_7.020_SDcard.img” 08/01/2018 with size 3,76 Go (4 041 211 904 octets) CRC32 : 11F61C9D 16M Continue Reading →
Test: Ktag on ME 9.7 Mercedes S350 2006 Tool: Ktag programming tool China clone Car: Mercedes S350 (W211) 2006 ECU: Bosch ME 9.7 Procedure: Select a model in KTag software IMPORTANT: make a backup copy of the ECU Connect the ECU to the Ktag programmer Pin 2 = GND Pin 15, 16 Continue Reading →
Have anybody test SSM cable cable with the ktag clone for PCR2.1? Yep. Work good with KTAG original and HQ clone. SSM tested more times, works perfectly. Read and write in BSL on table without unlock after read password with SSM cable. PCR2.1 full flash VERY IMPORTANT!!! Pinout cabl Continue Reading →
Hello, how i can add manual to kess and ktag, into cd i have ksuite help zip but i don’t know the way for add to program, thanks! Reply: Hello, I had the same problem as you, unable to open the Help, even though I have placed the zip that came in the folder in the folder c:/ksuite Continue Reading →
PCR2.1 full flash VERY IMPORTANT!! In recent update,Kess V2 now can write PCR2.1 with VR-file without needing patch first with KTag. And KTag now also has the ability to extract the password and then do full read and write thru bootmode. Such a read can then be used by Alientech in their database Continue Reading →
2017 XMAS SALE on Obdexpress.co.uk: http://www.obdexpress.co.uk/search/?q=Xmas+Sale&DirID= – Best price for hot products – Free gifts: Cost more than 199 euro – get OP-COM for free Cost more than 399 euro – get VAG CAN PRO for free Top 5 Hot Items on Obdexpress. Continue Reading →
I post how to reset Ktag and Kess v2 ecu tuning tool 1.Download version ksuite 2.08 here 2.Buy new sd card 1gb-2gb and format in fat32 ussing this program 3.For kess use this cfg and 4 file Copy on sd card 4 file and in ksuite 2.08 open folder update and copy update folder Connect kess and wait f Continue Reading →
Ktag should be able to program with Jtag, BDM and Boot protocols. However, I have no luck with Ktag 6.070 for Tricore BOOT; My way is to rework the board Before rework:Everything working fine (BDM, Kline etc.) except Tricore boot Connection OK, ID OK , begin reading ok , then jump when reading an Continue Reading →
It helps how to unlock, read and writeSimos PCR2.1 from VW Golf VI 1.6tdi. Look here: i have past last week trying many thinks on pcr2.1 and bench flashing . everything written below is tested and confirmed working by me on 4 ecus /cars ,only on chinese clone not reworked unit : fgtech v54 Continue Reading →
Is Ktag 7.026 better than Ktag 7.020? Is it worth buying a new tool just for this upgrade? See how do people think of this? Discussion at http://mhhauto.com/ 1 This 7.026 update is all ready available from EU. “Problem ” is resetting. NXP need replace when Continue Reading →
OBDexpress received a customer review of Ktag programmer. Look here: Hello Today i received my chinese ktag after i receive it i open case and see the board maybe best component not same first example resistor filter it’s good quality, not Continue Reading →
MED GPT cable 14P600KT06 is necessary to be used with Ktag for Bosch MED17 GPT ECUs reading. So, how to make it your self & how to use it for connection? Here you go. What is Ktag 14P600KT06 GPT cable: It is used for BOSCH MED17 GPT ECUs Sale at How to make a Ktag GPT cab Continue Reading →
Topic: Is possible to read/write edc17cp14 with Fgtech 4 in boot mode?? Fgtech 4 EDC17CP14 Reviews: Works great with FGTECH ! Tested in boot mode, read&write eeprom+flash ok Galleto v54 clone read – write ok in bootmode read write ok,but one tim Continue Reading →
Copyright © 2019 | OBDexpress.co.uk
