BDM Frame with Adapters: Works good with Ktag 2.23

This is my experience pack software using BDM frame connectors china clone with  Ktag 2.23

 

I have already received the shipment and I have time to test them without problems in Bosch EDC16U1 and in bosch EDC17c46. before using them I have reviewed almost all of these and I have not had any problem with the circuits, the lines or the solders of the pins. Someone mentioned that I had problems with resistance and fortunately I did not have these problems. So far all circuits and components are well installed and functioning as it should be.

Here I attach some photos where you can see how I start writing on a Bosch EDC17c46 ECU from Vw Yeti 2014

bdm-adpater-review-1 bdm-adpater-review-2 bdm-adpater-review-3 bdm-adpater-review-5 bdm-adpater-review- ktag-write-EDC17c46-Vw-Yeti-2014-1 ktag-write-EDC17c46-Vw-Yeti-2014-4 ktag-write-EDC17c46-Vw-Yeti-2014-5 ktag-write-EDC17c46-Vw-Yeti-2014-6 ktag-write-EDC17c46-Vw-Yeti-2014-7 ktag-write-EDC17c46-Vw-Yeti-2014-8

  1. the only thing I did not like is the connector for siemens pcr2.1.
    I do not understand the connections very well since they do not coincide with the Ksuit scheme

 

 

I bought all from this seller: the bdm frame with adapters http://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm100-fgtech-kess-ktag.html and the katg http://www.obdexpress.co.uk/wholesale/ktm100-ktag-red-pcb-ecu-programmer.html

ktag-bdm-connector-review

Share