Have Kia kefico m7.9.8 to read the ECU pinout boot mode or BDM, need Ktag, FGTech, transdata.This article is available with how to read FGTECH and how to read with transdata and Ktag etc.
- Read Kia kefico m7.9.8 with FGTech, here is a tutorial
http://blog.obdexpress.co.uk/2017/08/08/fgtech-galletto-v54-100-readwrite-bosch-mg-7-9-8/
- Read Kia kefico m7.9.8 with transdata and Ktag, here is a tutorial.
BOSCH_M798_KIA
The LAY by pins are located on the lower part of the ECU
PLUGIN 167
Connect the power (+12v) only for DIRECT CONNECTION,
do not connect power (+12V) with DIMA CONNECTION
DIRECT CONNECTION
Connect the universal wiring to POL4 & POL5 and to the ECU connector as shown in the pictures.
DIMA CONNECTION
Connect the blue wire to POL5 and to DIMA adapter as shown in the picture.
I would advise using pencil, it is always faster, comfortable and clean to work.
From http://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm100-fgtech-kess-ktag.html
