Yanhua ACDP BMW IMMO & Cluster program: what, why, who, how much, how, where

Yanhua Mini ACDP BMW package for IMMO & Cluser is available to meet more and more users’ need. If you are interested in Mini ACDP BMW package, you come into the right page, it answers 4 W’s and 2 How’s: What include, Why user prefer to Mini ACDP, Who use, where to buy, how much does it cost, how to use, as well as users’ feedback.

Here we go:

What does Yanhua Mini ACDP BMW full package include?

1). ACDP Programmer Basic Module:

Support 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP), and parts of Freescale / NEC MCU in circuit programming（ICP）. This module is a necessary basic configuration for other modules.

2) CAS Module (module 1)

(1) Support CAS1 – CAS3+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data.

(2) Support CAS4/CAS4+ IMMO key programming in circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data.

3) FEM / BDC Module (module 2)

Support FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.

4) ISN Module (module 3)

Read/write N20/N55/N13 ISN code via OBD.

Read/write MSV80/MSD85 ISN code without opening DME shell.

Read/write other DME ISN code by opening DME shell.

5) 35160 Module (module 4)

Can erase/adjust mileage of 080DOWQ/T,160DOWQ/T EEPROM.

6) Refresh BMW key (module 7)

Refresh BMW E chassis/F chassis key to make BMW keys can be used repeatedly.

7) FRM module (FRM Footwell module) (module 8)

Read and write BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data.

Why Yanhua Mini ACDP BMW full package? Who use Yanhua Mini ACDP?

No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin

That means, it is very easy to use, friendly for the junior users and medium users.

If you are a boss or a shop owner, you used to pay higher labor cost for a qualified welder, with Yanhua Mini ACDP, a skilled worker can do the same job.

How much does Yanhua Mini ACDP BMW full package cost?

It is less than 1000EURO

For example.

http://www.obdexpress.co.uk/wholesale/yanhua-mini-acdp-progarmming-master-bmw.html

It’s a authorized dealer.

Yanhua Mini ACDP BMW feedback

Yanhua Mini ACDP BMW package feedback on BMW CAS1-4+ key programming, BMW FEM/BDC IMMO key programming, ISN read and write.

I got it since a week and i am excited
M35080 Programming needs some improvements, there are some bugs (tested on 4 dashs, and it’s better to desolder)
Serial EEP 24XX, 25XX, 93XX, 95XX works like a charm (but tested on only 3 Eeps)
Tried several CAS4 to Read without any problems, Mileage reset works too
CAS3 tested only 1 but readed without problem
On a another group they reported to create successfully keys on FEM/BDC and CAS4

Reading eprom cas4 and make a key for f11 so far done.

cas4 reading eprom compared with vvdi reading and its matching 100%.

All other 35080/160 are possible, like all other programmer can do also.
ACDP is also working with smartphone tethering so a router is not a must.
Didn’t test if it works offline,

Fem key making and mileage reset is confirmed by other users in WhatsApp group,
I can confirm mileage reset cas3/3+/4, key making cas3/3+, key 868mhz refresh
and frm programming.

I have it and have had it for more than 3 months now.
It works perfect on all CAS types and for AKL but for FEM and BDC it still has a long way to go.
Its also compitable via bluetooth so not only wifi is needed.
Its a great and small tool, easy to use, compared to VVDI, R70, Upa and etc.

Tested the Mini ACDP here with 4 CAS3 and one CAS4+ without any problems. For the first CAS3 I needed more than 5 minuntes to place the pins correctly but after some experiences I needed only 30 seconds for everything. Important is that you use the small screw tools to clean the contacts.

BMW 5 series CAS4 2015 OK.

Questions and Answers:

Q: But sometimes it’s tricky to place the probes correctly, it’s faster to use other programmer
until you have figured out how to place probes correctly.

A: The newest version (09-19-2018)ACDP with improved CAS3 and CAS4 board fix the problem that it’s difficult to place the probes correctly.

Q: For FEM/BDC I use my Autohex II and for eeproms my other stuff like R27, Codiprog USB mk2 and Orange5.

A: For FEM/BDC, 3 months ago, it needed FEM electric bridges to complete. Now update Mini ACDP to the newest version, it won’t need the electric bridges any more, it is easy to use.