lonsdor-k518ise

I bought Lonsdor K518ise for BMW CAS keys only…

December 7, 2018 sales 0

I bought Lonsdor K518ise for CAS keys. The ford nissan and toyota can be done by even other very cheap programmers. As long as Lonsdor cannot do BMW CAS keys it is useless to me. On all other cars I have even cheaper tools that don’t even cost half the cost of Lonsdor updates that do the job. D Continue Reading →

gm-mdi-multiple-diagnositc-interface-1

How to update cloned GM MDI serial number

December 6, 2018 sales 0

Here are some great tips and guides of GM MDI clone serial number update if you need to.   The GM MDI serial number is in the 16mb on board flash memory – the intel chip on the computer sub-board. You can get u-boot access by making up a serial cable. Signals are available on the 8 pin mi Continue Reading →

ista-pad-mode

How to Activate ISTA+ Diagnosis PAD Mode

December 5, 2018 sales 0

BMW ISTA+ Diagnosis PAD Mode all detailed can be found here:   What is the PAD mode on ISTA? PAD is the short form of Testing analysis diagnosis. The PAD mode is the vehicle condition between “Residing” and “Driving”.The PAD mode corresponds to the physical “ter Continue Reading →

How to change a language for Diagbox 7.83

December 4, 2018 sales 0

This info here is aimed to help change a language for Lexia stable version v7.83, especially for pp2000 works fine but lexia cannot change the language.   Having installed your language and keyboard in Windows and set the non-Unicode programs to revert to the preferred language in System Loc Continue Reading →

open-your-star-sdc4-2018-12-04

12.2018 DAS/Xentry XDOS Activate

December 2, 2018 sales 0

12.2018 Xentry XDOS Openshell download: 500GB HDD:http://www.obdexpress.co.uk/wholesale/2018-12-mb-sd-c4-c5-software-hdd.html 256GB SSD:http://www.obdexpress.co.uk/wholesale/2018-12-mb-sd-c4-c5-software-ssd.html Tested 100%, confirmed to work perfect with SD connect C4 in diagnostics, coding and Continue Reading →

Carprog user manual

December 1, 2018 sales 0

It’s a clone Carprog user manual. Here you go…. • Powering up the carprog full v8.21: CarProg can be used with external power supply (+7 – +12V stabilized), only with USB connection or with diagnostic cable ( for ex. OBDII) • Standard power socket (positive in the middle) vol Continue Reading →