Yanhua Mini ACDP On BMW Mini Cooper key programming: 100% Work!

Confirmed: BMW Mini Cooper remote programming can be done by Yanhua Mini ACDP programmer.

If it is CAS3, ACDP can do via OBD, if it is CAS3+, ACDP can do only after dismantling the CAS3+ and program new key using interface board.

 

Method 1: ACDP program remote on Mini Cooper using the interface board


 

Method 2: ACDP program remote on Mini Cooper via OBD

Obd port: located in the driver side, on the left

Yanhua-ACDP-CAS3-add-key-1

Connection: Mini ACDP is connected to the car, through OBD

Yanhua-ACDP-CAS3-add-key-2 Yanhua-ACDP-CAS3-add-key-3

The test:

Insert the key

Run Mini ACDP application on the mobile

Run BMW module programming

Yanhua-ACDP-CAS3-add-key-4

Select CAS3/CAS3+

Yanhua-ACDP-CAS3-add-key-5

OBD mode

Yanhua ACDP CAS3 add key-6

Immobilizer

Yanhua ACDP CAS3 add key-7

Step 1: read CAS data

Step 2: generate a dealer key/program a key

Step 3: write new key data into CAS

Step 1: read CAS data

ACDP is gonna to read CAS data

Yanhua ACDP CAS3 add key-8

Pop-up: Take out the key and wait for 5 min.

If the key without ignition-start function, take the key outside the car, 3m away

Read immo data successfully

Yanhua ACDP CAS3 add key-9

File (CAS3_ORGKEYxxxx.bin) has been backup.

Yanhua ACDP CAS3 add key-10

Upload bin file

Save the immo data to generate a dealer key

Yanhua ACDP CAS3 add key-11

 

Step 2: generate a dealer key/program a key

Yanhua ACDP is gonna to add a new key

Check the connection of BAV adapter

Prepare a blank key

Choose the correct bin file with immo data

Yanhua ACDP CAS3 add key-12

Here select Key 5 to program

Yanhua ACDP CAS3 add key-13

Note: Gray number is used for the original key

The black numbers are available for calculation

Pop-up: It’s one of keys available. If you enable a new key, the original key will not work anymore.

Yanhua ACDP CAS3 add key-14

Select a method to generate a dealer key

Here: add a new key with a working key

Yanhua ACDP CAS3 add key-15

Check if the key is a smart one or not. If yes, you have to choose Key 1-3

Here: it’s not a smart key

Go to add a new key

Insert the blank key to program

Yanhua ACDP CAS3 add key-16

Programming…

ACDP successfully programmed a new key

The generated CAS data includes the new key info.

Pls go to write new data into CAS

Yanhua ACDP CAS3 add key-17

File is backup

Upload file (will be written into CAS…DLRKEY…bin)

 

Step 3: write new key data into CAS

Insert the original key before you’re gonna to write data into CAS

Yanhua ACDP CAS3 add key-18

Go to update key data

Select the correct bin file

Yanhua ACDP CAS3 add key-19

Select a method to generate a dealer key

Here: add a new key with a working key

Updating new immo data

(writing the key data into CAS)

Immo data is updated successfully.

Yanhua ACDP CAS3 add key-20

Backup data

Please install the CAS into the car and try the new key to start.

Yanhua ACDP CAS3 add key-21 Yanhua ACDP CAS3 add key-22

The ELV is faulty; you should synchronize it

 Yanhua ACDP CAS3 add key-23

Go to special function, synchronize CAS and ELV

 Yanhua ACDP CAS3 add key-24

Synchronize CAS and ELV successfully

 Yanhua ACDP CAS3 add key-25

Backup data

Insert the new key again to start

 Yanhua ACDP CAS3 add key-26

The dashboard works well, without fault codes

 Yanhua ACDP CAS3 add key-27

 

Done.

 

Credits to www.obdexpress.co.uk

Share