PCMFLASH 1.99 win7 free download including software, driver, wiring diagram. PCMFLASH 1.99 is running great with KTM Bench interface.
PCMFLASH 1.99 win7 free download
https://mega.nz/#!B9oTQahI!HNlNhOuMYmYghLlLyCSECV6GyLbDJLg8wTZrv1J2m10
No password
Security: 100% yes.
KTM Bench has no tokens limitation.
VERY IMPORTANT:
The computer can’t be connected to the internet;
The KTM Bench can’t be updated.
Otherwise the machine may be locked and will be charged for repair.
Tips of using KTM Bench to read write ECU:
Tip 1. After selecting the ECU type and the CPU chip type, pcmflash 1.99 can read the ECU data. Also to select the ECU type and CPU chip type to read the wiring diagram.
pcmflash 1.99 can read the data for all the [71] ECU types via boot cable instead of removing the ECU, but it requires to connect GPT0 and GPT1 cable.
For example, if the ECU box removed from the car is edc17 c54, then the CPU is tc1797, just follow our supplied wiring diagram to connect the ECU instead of removing the ECU, good to know: GPT0 and GPT1 cables must be connected, then choose 1797 cpu option.
KTM Bench pcmflash 1.99 reads the ECU data by dismantling the ecu and connect the boot, which is as the same as KTMflash 1.95. It requires to read the password first, then choose “read the data”.
Tip 2: KTM Bench reads writes the ECU data without dismantling the ECU:
1). Easy to operate and save time up to 5-10 minutes. Otherwise it may take more than 20minutes to dismantle the ECU and even more than 1 hour, also the box may be damaged during dismantling.
2) Dismantling the ECU may damage the original ECU sealing condition.
3) After dismantling the ECU, the boot must be connected.
4) After reading out the data, it needs to reseal ecu.
KTM Bench wiring diagram (screenshoot from the above mega link):
