V2014.01 Multi-Diag Access J2534 Activation Error

After install and activate V2014.01 Multi-Diag Access J2534 Pass-Thru OBD2 Device software (disable network connection and antivirus software already),the system prompt software did not activated successfully.

Error

sp04

Reason:
installation failed

Solution:
1. Install the Multidiag J2534 activation pactch

http://www.mediafire.com/download/vc4zjqp4mkrweho/Desactivation_MAJ_.zip

2.Change computer system to windows xp

3.If still failed,download Multidiag 2014.1 software and re-install again.

http://www.obd2vip.com/download/multi-diag-access-j2534-2014-1-part01.zip

http://www.obd2vip.com/download/multi-diag-access-j2534-2014-1-part02.zip

http://www.obd2vip.com/download/multi-diag-access-j2534-2014-1-part03.zip

http://www.obd2vip.com/download/multi-diag-access-j2534-2014-1-part04.zip

http://www.obd2vip.com/download/multi-diag-access-j2534-2014-1-part05.zip

http://www.obd2vip.com/download/multi-diag-access-j2534-2014-1-part06.zip

http://www.obd2vip.com/download/multi-diag-access-j2534-2014-1-part07.zip

 

Installation Video Guide:
How to install V2014.01 Multi-Diag Access J2534 Pass-Thru OBD2 Device
http://www.dailymotion.com/video/x2mxi54_how-to-install-multi-di-g-access-j2534-2014-1-software_auto

What should you pay attention to use this software:
1) DISCONNECT the internet when you install and use this software
2) Follow our I-2014V Multi-Diag Access J2534 software installation video install the software step by step
3) Software needs activation before. Please send ID (format is only 31-xxxxxxxxxxx) and your order number to sales@obdexpress.co.uk, we will send the activation code for free.
4) After finish software installation. Go to the following folder C: \ ACTIA \ portal and then delete the file WEGT.EXE. Once delete this file. (If your software prompt you out of date when usage, do this step too)

Share