Thread: problems with Xhorse BE key improved version
Does anyone of you have problems with Xhorse BE key pro improved version??
I have same problems like on old PCB
The problem is: sometimes the key isn’t recognize by EIS. Then need to remove end put again..
The package I have:
Re: problems with Xhorse BE key improved version
I just had 2 be keys that would not work yesterday. I wrote to another key and the car started fine.
tried 3 open spots
Re: problems with Xhorse BE key improved version
what was the symptoms i had a w211 yesterday two keys BE neither worked, kept saying please wait learning key. remote worked fine. what type of key did you use in the end
Re: problems with Xhorse BE key improved version
I in that case you need to write the key to another position.
Or leave in ignition for up to 24hrs
Re: problems with Xhorse BE key improved version
Try position 1 and Make sure you have good voltage
