(solved) Kess v2/Ktag NOT Work with Gray Buttons in Ksuite

How to solve Ktag/kess v2 not working with gray buttons after successful ksuite installation? Professional solutions from obdexpress.co.uk….here you go…

 

kess-ktag-gray-buttons

ksuite v1.93 download on mega:

https://mega.nz/#!f8xQGLRA!8ZNod0YLAI-bY0rezjpthlBxyg-lzMSWnZCBoreCUuY
Working ok with:

SE87-D: V2.28 KESS V2 Firmware V4.036
SE80-B: KTAG Firmware V6.070 KSuite V2.1.3
SE80-D: V2.13 KTAG KTM100 FW V7.003

Suitable for the ktag/kess v2 QC mark ends with numbers“015”

Not suitable for other kess or ktag programmers.

If you try on other version, obdexpress.co.uk hold no responsibility for your try.

 

How to solve:

1- cut the folder of kusite (v2.11) and paste it to Desktop

2- install ksuite v1.93 software

3- delete the ksuite folder in disk C:

4- cut the ksuite v2.11 folder on Desktop and paste it to C:

5- KTAG Firmware V6.070, KTM100 FW V7.003, KESS V2 Firmware V4.036 can work now!

If not, contact to your vendor.

kess-ktag-gray-buttons-solved

Good luck with ecu tuning!

 

 

Tech support from http://www.obdexpress.co.uk/

Share